Fischer Amps IEM-BP-XL in-ear belt pack, hard-wired (PSU not included)

The Body Pack XL has the same functional principle as the Fischer Amps Hardwired In Ear Body Pack, but it includes an additional Mic-In which allows to add-on a microphone signal to the stereo or mono mix received. An additional feature for the microphone input is the parallel out which allows to loop the microphone signal. The Body Pack XL is powered with a 9V battery or an additional mains adaptor (not included). This Body Pack is a compact in ear solution not only for orchestra musicians who want to mix their own microphone signal to the incoming in ear signal, but it is also an excellent tool for sound engineers to monitor microphone signals.

The integrated low-noise microphone preamp has standard features such as:

• 48V phantom power 
• PAD switch to reduce the input signal by 20 dB 
• gain control from + 12 dB to + 60 dB 
• add-on low-cut at 70 Hz
  
• Input jacks:  3 Neutrik XLR 3-pole, with interlock
  
• Output jack:  3.5mm / 1/8" mini jack stereo, 1 XLR Mic Link-Out
  
• Frequency response:  30 Hz - 20 KHz +/- 2dB
  
• Min. impedance of earphones:  12 ohms per side 
• Input impedance:  15kohms channel 1 and 2; 2 kOhms microphone input (with PAD switch = 15 kOhms) 
• Nom. input level balanced:  0 dBV (channel 1 and 2) 
• Max. input level balanced:  +4dBV (channel 1 and 2) 
• Limiting of the input signal:  from +5 dBV (channel 1 and 2) 
• Input level mic input:  -60 dB to +6 dB 
• Max output power into 20 ohms:  40 mW per channel 
• Max. operating current:  65 mA (with add-on phantom power 120-140 mA)
• Power supply:  9V block alkaline battery or 8.4V rechargeable battery NiMH with min. 270 mAh 
• DC input:  Ext. input power DC 9V (pin +, ring -) 
• Operating time of battery:  Alkaline battery (500 mAh) approx. 7.5 hours, NiMH rechargeable battery (270 mAh) approx. 4 hours (depending on headphones volume)